Avery Dennison MPI 1105 Wrapping series

What it is

A premium-quality gloss white cast printable vinyl for vehicle wrapping and high-conformability signage: 50-micron cast face film (80 microns with adhesive), permanent acrylic adhesive with grey tie coat and long-term removability, on a 155 g/m² StaFlat liner. Avery Dennison states suitability for solvent, eco-solvent, UV and latex printing and recommends its DOL 1460 Z Gloss or DOL 1480 Z Matt overlaminates for protection.

Who it may be relevant for: Vehicle-wrap and signage businesses printing conformable cast media — the print film half of a film-plus-overlaminate system.

UK market notes

• Avery Dennison's own EU graphics site names UK distributors (Spandex PLC, Premier Paper Group, Victory Design, Elliott Baxter, All Print Supplies, Pyramid Display Materials, Europoint) on a distribution news page — manufacturer-named channel evidence, though the page is undated and contextually older; a find-a-distributor locator also exists. Confirm current stocking with a listed distributor.
• Roll widths and lengths for the European programme are not stated on the fetched data sheet or overview — confirm available formats with your distributor.
• Two variants: MPI 1105 and MPI 1105 EA RS (Easy Apply RS air-egress liner for slideability and repositioning during application).

Confirm the exact supplied model, electrical configuration and warranty with the manufacturer or a UK authorised distributor before purchasing.

Specifications

Every figure below is traced to a numbered source. “Manufacturer figure” marks values stated by the manufacturer under their own test conditions — not independent measurements. Specifications change; confirm anything critical with the manufacturer before purchasing.

Documented compatibility

Only relationships the manufacturer (or, where marked, a distributor) states in writing. Absence from this list does not mean incompatibility.

• Avery Dennison DOL 1460 Z / 1480 Z overlaminates — recommended by Avery Dennison's MPI 1105 data sheet and product page as the protecting overlaminates. Manufacturer-confirmed (EU statement)[2] · verified 2026-07-17Stated by Avery Dennison (maker of both products) on the MPI 1105 side; the DOL data sheet recommends MPI cast media generically.

Limitations

• Durability ratings are Avery's, under stated vertical middle-European conditions — high-temperature exposure reduces them.
• European roll formats are unpublished on the fetched documents.
• The UK distributor news page is undated — treat it as channel evidence and confirm current stocking.
• The data sheet is issued 07/2021 — re-verify at the next review pass.

Sources & verification

1. [1] MPI 1105 Wrapping series | Avery Dennison Graphics EUAvery Dennison Corporation (EU graphics site) · official European source · accessed 2026-07-17
2. [2] MPI 1105 Wrapping series — Product Data Sheet (EU, issued 07/2021)Avery Dennison Corporation · official European source · accessed 2026-07-17
3. [3] Avery Dennison graphics distribution in the United Kingdom (news page)Avery Dennison Corporation · official European source · accessed 2026-07-17 · Names the UK distributor network; page undated and contextually older — treated as channel evidence, not current stocking proof

Spotted an out-of-date or incorrect specification? Tell us — corrections are reviewed against official documentation.