Vivid Matrix MX-530DP
Vivid Laminating Technologies' dual-sided roll laminator: 500 mm maximum film width, 10 m/min mechanical speed and 0–140 °C temperature range, with a 32 A supply requirement stated on the datasheet — specified from the UK manufacturer's own datasheet and current product page.
What it is
A dual-sided (duplex) roll laminator for print finishing: it laminates both sides of a sheet in one pass, with pneumatic pressure, anti-curl control, semi-automatic feeding, a 10-minute warm-up and support for foil and spot-effect workflows. Film loads on 77 mm (3 in) cores.
Who it may be relevant for: Print and sign businesses laminating digital output at volume — the finishing companion to printable films and overlaminates.
UK market notes
- Vivid Laminating Technologies Limited is a UK manufacturer (Companies House 02063018, active, incorporated 1986; Ashby-de-la-Zouch, Leicestershire) — its datasheet states its machines are produced in Britain. Sold direct and through a partner network.
- The electrical requirement is materially different from a plug-in machine: 220/240 V with a stated 32 A supply requirement and 4,500 W consumption — plan a dedicated supply; this is not a 13 A domestic-plug machine. Frequency is stated as 50 Hz on the current page; phase is not stated.
- Weight is stated differently by Vivid's own sources — 250 kg on the datasheet, 350 kg on the current product page — both reproduced; confirm with Vivid if it affects installation.
- No CE or UKCA statement appears on the fetched page or datasheet — confirm conformity documentation with Vivid.
Specifications
Lamination
| Specification | Value | Basis |
|---|---|---|
| Maximum film width | 500 mm maximum lamination film width; 550 mm maximum sheet width | Verified[2] |
| Maximum mechanical speed | 10 m/min maximum mechanical speed (mechanical rating — job speed depends on stock and film) | Verified[2] |
| Temperature range | 0–140 °C; warm-up approx. 10 minutes | Verified[2] |
| Duplex operation | Laminates both sides of the sheet at the same time (Vivid's wording); pneumatic pressure; anti-curl; semi-automatic feed; 77 mm (3 in) film core | Verified[1] |
| Minimum stock | Minimum paper thickness 100 gsm double-sided, 135 gsm single-sided (datasheet footnote). Film thickness compatibility in microns is not stated on the fetched documents | Verified[2] |
Electrical & environment
| Specification | Value | Basis |
|---|---|---|
| Electrical (UK) | 220/240 V; stated supply requirement 32 A; power consumption 4,500 W; the current page states 50 Hz. Phase is not stated — plan the supply with your electrician and confirm with Vivid | Verified[2] |
Physical
| Specification | Value | Basis |
|---|---|---|
| Dimensions | 900 × 2,050 × 1,400 mm | Verified[2] |
| Weight | Vivid's datasheet states 250 kg gross; its current product page states 350 kg — the two official figures differ and both are reproduced; confirm with Vivid for installation planning | Verified[1] |
Warranty & compliance
| Specification | Value | Basis |
|---|---|---|
| Warranty | 1-year warranty stated on the datasheet, with full parts-and-labour terms referred to Vivid's warranty-information page — confirm current terms at purchase | Verified[2] |
| Conformity documentation | Conformity status was not confirmed from the reviewed official sources — no CE or UKCA statement appears on the fetched page or datasheet. Request documentation from Vivid with your order. | Not verified |
Limitations
- Film thickness compatibility (microns) is not published — only paper-stock gsm minimums.
- The weight is stated differently by Vivid's own datasheet and current page (250 vs 350 kg) — unresolved, both shown.
- The datasheet is undated (uploaded 2019) though still the document Vivid links today; figures were cross-checked against the live page.
- A 32 A supply requirement means installation planning — this is not a plug-and-go machine.
Material
Avery Dennison DOL 1400 Z Series
Avery Dennison's cast protective overlaminates for printed wrap films: 30-micron clear cast vinyl in gloss, lustre and matt finishes with a 6-year rated vertical durability — specified from the EU product data sheet issued March 2025.
Material
Avery Dennison MPI 1105 Wrapping series
Avery Dennison's premium cast printable wrapping vinyl: 50-micron gloss white cast face film with long-term removable acrylic adhesive, rated up to 10 years unprinted — specified from the EU product data sheet, with its recommended DOL overlaminates stated by Avery's own documents.
Equipment
Trotec Speedy 400
Trotec's flagship CO2/flexx laser engraver-cutter: 1016 × 610 mm working area, up to 4.32 m/s processing speed and 80–120 W CO2 laser options — specified from Trotec's own UK site and dated technical datasheet, with a verified UK subsidiary and named showrooms.
Run the machines; let damantra run the jobs
Quotes, orders, artwork approvals, production stages and invoicing in one calm system — built for the shops this reference is written for.